LBHS-1790

  • LBHS-1790
Sewing speedMax. 4,200sti/min, Normal 3,600sti/min
Needle bar stroke34.6mm
Size of cloth cutting knife6.4~31.8mm (1/4"~1-1/4")
Bartacking widthMax. 5.0mm
Buttonhole length Max. 41mm (optional: 120mm) LBHS-1795: 120mm
Precision of needle throwing mechanism 0.05mm
Needle thread tension Active tension (electronic thread tension control system)
Number of stitches Automatically computed from the size of the buttonhole and stitch pitch
NeedleDP×5 (#11J) #11J~#14J
HookDP type, full-rotary hook
Lift of the work clamp14mm(17mm by the reverse-rotation needle-up function)
Auto-lifter Provided as standard (stepping motor type)
Needle throwing systemStepping motor
Cloth feeding systemIntermittent feed by stepping motor
Cloth cutting knife systemBy double-acting solenoid
Number of standard patterns30 patterns
Number of patterns that can be input Max. 99 patterns
Bobbin thread winder Built-in the machine head
Machine head drive systemCompact AC servomotor (direct-drive system)
Power requirement/ Power consumptionSingle-phase 220V, 230V, 240V・3-phase 200~240V/600VA
LubricationOnly the hook section needs a minute-quantity lubrication.
Lubricating oilHook: New Defrix Oil No.1 (equivalent to ISO VG7)
Total weight112kg

Excellent Performance

Cycle sewing•Continuous sewing   

  • Cycle Sewing
    20 different programs can be registered, and as many as 15 different patterns can be stored in one program.
  •             
    The machine is able to continuously sew many different patterns without requiring the work clamp foot to be lifted. As many as 20 programs can be registered, and 6 different patterns can be stored in one program. (Related parts need to be exchanged for optional ones.)


High Speed and Clean 

  • Max. 4,200sti/min, Normal 3,600sti/minsubstantially decreased.
  • Advanced dry-head technology, no lubrication is required except for the hook section. This eliminates oil stains on the sewing product.




All drive mechanism is electronically

  • An electronic control feature has been adopted for the material feed mechanism, needle rocking mechanism, needle thread trimming mechanism, bobbin thread trimming mechanism, cloth cutting knife mechanism and presser bar lifting mechanism.,
  • All adjustment values are entered as data. They can be set or stored in the memory on the operation panel.



Pedal motionPedal type
2-pedal 1-pedal
(without intermediate position)  
1-pedal
(with intermediate position))
Initial position
②Intermediate position①Maximum position①Maximum position
Setting of sewing productPresser goes up as high as pedal toe down amount of the left side pedal.Presser comes down when the left side pedal is depressed.
→③Sewing position
The first step of the right side pedal
→③Sewing position

The first step of the right side pedal
→③Intermediate position

The second step of the right side pedal
→③Sewing position

Start of sewingThe right side pedal is deperssedThe second step of the right side pedalThe third step of the right side pedal
End of sewing②Presser automatically goes up to intermediate position①Presser antomatically goes up to maximum position①Presser antomatically goes up to maximum position
Work clamp position

Many functions of the pedal

  • The machine is provided as standard with auto-lifter driven by a stepping motor. This helps reduce the operator’s fatigue. As for the pedal, 1-pedal and 2-pedal modes can both be changed over and the intermediate stop, which facilitates positioning of the sewing product, can be specified.
  • The work clamp foot lift can be set as desired. The reverse-rotation needle-up function offers a maximum work clamp foot lift of 17mm.


Purl stitching ←→ Whip stitching      Single stitching → Double stitching


     

(For a changeover between purl stitchand whip stitch, threading of bobbin,as well as the bobbin thread tension need to be changed.)



•For double stitching, the bartacking section is skipped and only the parallel

sections are sewn twice. This prevents any excessively tight finishes in the bartacking section of the buttonhole.

•First- and second-round stitches can be sewn using different stitch widths.






Knife sizeCloth cutting knifeCloth cutting knife ,
Work clamp
Work clamp foot
For stitch width 5mmFor stitch width 6mm
LBHS-1790S
standard)
LBHS-1792K
(for knits)
LBHS-1795A
(standard)
LBHS-1790S
(standard)
Part No.Mark(Length of cloth cutting knife)
(A×B)
Part No.1790
S
1792
K
Part No1790
S
6.4mm (1/4″)BL724AJK AP570CJK(6.4~19.1mm)<1> (4×25mm)◎P576JK
(6.4~19.1mm)
<1> (4×25mm)
 P575AJK
(5×120mm)
 P573JK
(6.4~31.8mm)
<3> (6×41mm)
P570CJK-A
<1>
◎ P574JK◎
9.5mm (3/8″)BL724BJK△B
11.1mm (7/16″)BL724CJK C
12.7mm (1/2″)BL724DJK◎D
14.3mm (9/16″)BL724EJK E
15.9mm (5/8″)BL724FJK△F
17.5mm (11/16″)BL724GJK G
19.1mm (3/4″)BL724HJK H
22.2mm (7/8″)BL724IJK IP571CJK(6.4~25.4mm)<2> (5×35mm) P572JK
(6.4~25.4mm)
<2> (5×35mm)
◎P572JK-A
<2>
 ◎
25.4mm (1″)BL724JJK△J
31.8mm (1-1/4″)BL724KJK KP574CJK(6.4~31.8mm)<3> (5×41mm) P577JK
(6.4~31.8mm)
<3> (5×41mm)