| 700L | Fabric Weight |
|
|
|
|
|
|
|
|
| |
|---|---|---|---|---|---|---|---|---|---|---|---|
L M H | |||||||||||
| General Seaming | 737L-503M-3-04 |
| 1 | 2 | – | 4 | 0.7-2 | 3.6 | 6 | #11 | 7500 |
| General Seaming | 737L-504F-2-04 |
| 1 | 3 | – | 4 | 0.7-2 | 3.6 | 5 | #11 | 7500 |
| General Seaming | 737L-504M-3-0□ |
| 1 | 3 | – | 4,5 | 0.7-2 | 3.6 | 6 | #11 | 7500 |
| General Seaming | 747L-512M-3-25 |
| 2 | 4 | 2 | 5 | 0.7-2 | 3.6 | 5.5 | #11 | 7500 |
| General Seaming | 747L-512M-3-34 |
| 2 | 4 | 3 | 4 | 0.7-2 | 3.6 | 5.5 | #11 | 7500 |
| General Seaming | 747L-514M-3-2□ |
| 2 | 4 | 2 | 3,4,5 | 0.7-2 | 3.6 | 5.5 | #11 | 7500 |
| General Seaming | 747L-514H-3-28 |
| 2 | 4 | 2 | 8 | 0.7-2 | 3.6 | 4 | #11 | 6500 |
| General Seaming | 757L-516L-2-24 |
| 2 | 5 | 2 | 4 | 0.7-2 | 3.6 | 5.5 | #14 | 7500 |
| General Seaming | 757L-516L-2-35 |
| 2 | 5 | 3 | 5 | 0.7-2 | 3.6 | 5.5 | #14 | 7500 |
| General Seaming | 757L-516M-3-35 |
| 2 | 5 | 3 | 5 | 0.7-2 | 3.6 | 5.5 | #14 | 7500 |
| General Seaming | 757L-516M-3-55 |
| 2 | 5 | 5 | 5 | 0.7-2 | 3.6 | 5.5 | #14 | 7500 |
| General Seaming | 767L-644M-3-324 |
| 3 | 6 | 3+2 | 4 | 0.7-2 | 3.6 | 5 | #11 | 7000 |
| General Seaming | 767L-644M-3-524 |
| 3 | 6 | 5+2 | 4 | 0.7-2 | 3.6 | 5 | #11 | 7000 |
| Fine Fabric with Anti Puckering | 747L-514F-3-23 |
| 2 | 4 | 2 | 3 | 0.7-2 | 3.6 | 5 | #11 | 7500 |
| Fine Fabric with Anti Puckering | 747L-514F-3-24 |
| 2 | 4 | 2 | 4 | 0.7-2 | 3.6 | 5 | #11 | 7500 |
| Fine Fabric with Anti Puckering | 757L-516F-2-34 |
| 2 | 5 | 3 | 4 | 0.7-2 | 3.6 | 5 | #11 | 7500 |
| Fine Edging | 737L-504F-2-02/GAL |
| 1 | 3 | – | 2 | 0.7-2 | 3.6 | 5 | #9 | 7500 |
| Fine Edging | 737L-504F-2-15 |
| 1 | 3 | – | 1.5 | 0.7-2 | 3.6 | 5 | #9 | 7500 |
| Fine Edging | 737L-504M-2-15 |
| 1 | 3 | – | 1.5 | 0.7-2 | 3.6 | 6 | #9 | 7500 |
OPTIONAL
700LD Product Package: Devices and Direct-Drive Control Sets
| Direct-drive Control Set | Device | Function | Accessory List | ||||||||||||
| Sensor | Safety Switch | Control Panel | Manual Cut Switch | Thread Release | Tape Cutter | Suction Trimmer | LED Light | Standing Operation Padel | Auto Foot Lifter | Suction Set | |||||
| Side Cutter | Flat Cutter | ||||||||||||||
DKLH1-0 Economic | DKLH1-0 Economic | - | General Sewing | ● | |||||||||||
| VT | Suction Thread Trimmer | ● | ● | #5 | #4,#5 | ||||||||||
| CT | Suction Thread Trimmer | ● | ● | #5 | #4,#5 | ||||||||||
| AC | Air Type Tape Cutter | ● | ● | ● | |||||||||||
| EC | Electric Type Tape Cutter | ● | ● | ● | |||||||||||
DKLT1-0 omic Type | - | General Sewing | ● | ||||||||||||
| VT | Suction Thread Trimmer | ● | ● | #5 | #4,#5 | ||||||||||
| CT | Suction Thread Trimmer | ● | ● | #5 | #4,#5 | ||||||||||
| AC | Air Type Tape Cutter | ● | ● | ● | |||||||||||
| EC | Electric Type Tape Cutter | ● | ● | ● | |||||||||||
DKLT1-1 DKLT1-1 Multi-function
| ECA | Air Type Tape Cutter | ● | ● | ● | ● | ● | ● | #2 | ● | ● | ||||
| VTE | Suction Thread Trimmer | ● | ● | ● | #1 | ● | ● | #2 | ● | ● | |||||
| VTA | Suction Thread Trimmer | ● | ● | ● | #1 | ● | ● | #2 | ● | ● | |||||
| CTE | Suction Thread Trimmer | ● | ● | ● | #1 | ● | ● | #2 | ● | ● | |||||
| UC | Top and Bottom Anti-Curly Edge | ● | ● | ● | ● | #2 | ● | ● | |||||||
| BKT | Simplied Auto Back Latch | ● | ● | ● | ● | ● | ● | ● | #2 | ● | ● | ||||
DKLT1-2 Multi-function | ECB | Electric Type Tape Cutter | ● | ● | ● | ● | ● Solenoid Type | ● | #2 | ● Solenoid Type | #3 | ||||
| VTE | Suction Thread Trimmer | ● | ● | ● | #1 | ● | ● | #2 | ● Solenoid Type | ● Suction Motor | |||||
| CTE | Suction Thread Trimmer | ● | ● | ● | #1 | ● | ● | #2 | ● Solenoid Type | ● Suction Motor | |||||
Remark:
● Standard accessory /# Optional accessory
#1: BK321-4
#2: EC467-A
#3: 1. ECB-A Air-mixed type (suction timing control)
2. TUD-2 Pure Electric type( Suction motor + from &rear suction set )
#4: 1. TUA-31 Air compressor is required.
2. TUD-2 Driven by Brushless motor
#5: TUA-32K Air compressor is required.
700L series
700LD series

Remark: ECB optional device
| ECA | PNEUMATIC TYPE TAPE/ THREAD CUTTER | ECB | SOLENOID TYPE TAPE/ THREAD CUTTER | ECB-A | ECB+PNEUMATIC SUCTION SET |
- Brand new sensor upgrades the performance. ECA is pneumatic type, and ECB is electric type, compatible with air suction slot, which makes the operation more smoothly.
1. Manual, semi-auto and fully-auto operation mode, attached the switch keys, and could be adjusted by the panel.
2. Mistake-proof protection device: One sensor equipped near the trimmer. If the sensor is blocked, the trimmer is deactivated effectively for avoiding from cutting the fabric.
3. Manual trimming compensation stitch key: If the thread is not cut due to the operation, it can be done by the key.
4. Under the manual mode, it could be fully backward pedaled to cut the thread.
5. For those special fabrics such as mesh fabric, mercerized cotton etc, the stitches are easily accomplished as well as the trimming by the professional computer controlled without mistake-trimming.
| CTE | Flat Type Suction Chain-cutter (with sensor-controlled energy-saving device) | VTA VTE | Side Type Suction Chain-cutter (with sensor-controlled energy-saving device) |
Electric eye (sensor) checks the fabric edge. It saves the energy consuming of air compressor system and also saves thread consuming.
1. Vertical suction trimming is suitable for sewing the light fabric like under-wear or irregular knitwear, to improve the efficiency.
2. The design of the suction inlet of the trimmer makes the trimming faster.
3. For those special fabrics such as mesh fabric, mercerized cotton etc, the stitches are easily accomplished as well as the trimming by the professional computer controlled without mistake-trimming.
4. Functions with auto stop sewing after trimming and with no fabric can save the stitches.
5. VTA trimmer is controlled by air cylinder, which reduces the blade stroke times and extends the durability.
| BKT | SIMPLY AUTO BACK LATCH |
- It is an ECA extending function. The sewing efficiency is very high. Special needle plate suction channel is for thread-end down turning. It pulls back the chain while a wink. The back latch length is about 3cm.

- SD T-Shirt Neck-back Tape Attaching
Control the folder’s horizontal positions (tape feeding and cutting). - Standard folder’s specification: Tape width 36mm, finish width 18mm.

- UC TOP AND BOTTOM ANTI-CURLY MATERIAL
The pneumatic device solves the problem of curly edge material. The fabric edge is flattened by air before entering the presser foot. Applicable to up-roll, down-roll, and all kinds of curly edge situations, which highly improves the sewing efficiency.

